Startseite|Adaptors/Connectors
Category

Adaptors/Connectors

CAE_X-ExpFlat#10_01

…adapter to the next emBRICK Modul in the next row Description With this adapter you can connect the bus to another row of emBRICK®-modules. This is nor-maly used in enclosures where space is limited. The next row is placed with 1mm distance between the PCBs. The male will be used on the right side of the modules and the female on the left side. The modules can be initialized from left and right. CAE_X-ExpFlatM10_01 Notes male conector to brickBUS CAE_X-ExpFlatF10_01 Notes female conector to brickBUS

CAE_X-Exp#10_01

…adapter to 10 pol boxed connector. Description With this adapter you can connect the bus to another row of emBRICK®-modules over a 10pol wire. The male will be used on the right side of the modules and the female on the left side. The modules can be initialized from left and right. To use this you also need one of these wires CAE_X-10Wire CAE_X-ExpM10_01 module size 11mm x 72mm Notes male conector to brickBUS CAE_X-ExpF10_01 module size 11mm x 72mm Notes female conector to brickBUS

CAE_X-10Wire

This is a 10pol wire with different dimensions and usage. So all with the subfix “-no3V3” are the 3V3 connection is opend, this will be used with the CBB_CPU-uniMind-1_#, then this board has his own 3V3 generation. The number after “Wire” is the length of the cable in cm. Order No.:  CAE_X-10Wire20 CAE_X-10Wire20-no3V3 CAE_X-10Wire30 CAE_X-10Wire30-no3V3 CAE_X-10Wire54 CAE_X-10Wire54-no3V3 These products are usable with the CAE_X-ExpM10_01 and the CAE_X-ExpF10_01.

CAH_RCa##

Rail-Enclosure CAH_RCa11 top-hat rail 11mm CAH_RCa22 top-hat rail 22mm CAH_RCa45 top-hat rail 45mm CAH_RCaEnd top-hat rail termination CAH_RCaFix top-hat rail attachment

Nach oben