Startseite|Masterbricks
Category

Masterbricks

CBT_CPU-uniCORE-1-28M

Cortex M3 with display 64 MHz, 512kB-F CBT_CPU-uniCORE-1-28M ID 1-516 module size 80mm x 80mm HMI 1x 128x64 (Graphic) 9x Keys (Interaction) 1x Beeper (Interaction) OS / Kernel 1x Proprietary / FreeRTOS (Mass) Data Storage 1x EEPROM 1x Data-Flash 1x SD-Card Interfaces (besides brickBUS) 1x Socket Modem 1x USB-Slave Notes with all features

CBB_CPU-uniMind-1-##

Local-Master .. Display (2 variants) .. Keys or Touch .. USB .. RTC, EEPROM .. Beeper, SD-Card .. LAN .. CAN .. Socket Modem Cortex M3 with display 64 MHz, 512kB-F Technical Data Input/Output Front LEDs – red, green for application use Back LEDs – 2x yellow (for system use) Inputs – LDR and potentiometer (both only Starter Kit) Display types / HMI 2.8", 128x64 dots with RGB backlight, 9 keys (CBB_CPU-uniMind-1_28?) 3.5”, QVGA, resistive touch, 6 keys (CBB_CPU-uniMind-1_35?) General supply voltage – 24 V DC ±10 % over CAN or brickBUS connector output supply capability – nominal: 0,3A@24V, 1A@3.3V specials – StarterKit variant available RTC supply (power off) – Li-Battery, approx. 5 years alternatively GoldCap, approx. 3 days processor – Cortex M3 (64 MHz, 512kB-F ) Mechanical specification dimensions (w)x(l)x(h)  – 180 x 116 x 35 mm weight – ca. 200 g ...

Z-BeagleboneBrick-##

Bus Coupler, Local-Master  Remote Coupling Unit for .. LAN (via Ethernet) .. CAN .. Serial (via RS485, RS232, TTL) .. USB, SD Card .. LCD-Display-Interf., Touch (res.) .. RTC (Li-Bat/Hi-Cap), EEPROM It is an adaptionboard for the Beaglebone Black from TI which becomes an important profes-sional industrial platform for many measure and controll applications. By keeping the standard brick sizes, it is possible to use this board in all given mounting types. The adaption unit is driven by 24Vdc and serves also as power-supply unit that delivers 3.3V and 24V for the slave modules. The LCSUL (together with the BBB) acts as an autark lo-cal-master and supply the logical control of the connected slave modules. Download Module Documentation Download Starterkit Documentation Z-BeagleboneBrick-01 ...

Z-RaspberryBrick-##

Bus Coupler, Local-Master Remote Coupling Unit for .. LAN (via Ethernet) .. Serial (via RS485 or RS232) .. USB, SD Card .. Display (via HDMI, USB-Touch) .. RTC, EEPROM It is an adaptionboard for the Raspberry-Pi (Rev. B) which becomes an important education tool and semi-professional industrial platform for many measure and control applications. By keeping the standard brick sizes, it is possible to use this board in all given mounting types. The unit is driven by 24Vdc and also serves as power-supply unit that delivers 3.3V and 24V for the slave modules. The LSUH acts as an autark local-master and does the logical control of the connected slave modules. Download Module Documentation Download Starterkit Documentation Z-RaspberryBrick-01 ID 1-701 module size 99mm x ...

Z-CouplingBrick-##

Bus Coupler, Local-Master Remote Coupling Unit for .. TCP/IP (via LAN/WLAN) .. CAN (via CAN2.0) .. Serial (via RS485, RS232) Description The LWCS is a connection device between a remote-master and a string of the brickBUS® slaves modules. The largest configuration (variant) contains the interfaces LAN, WLAN, CAN and Serial which can be used to couple a remote-master. It is also possible to use the CAN and RSxxx as an IO-device (on request). The unit is driven by 24Vdc and also serves as power-supply unit that delivers 3.3V and 24V for the slave modules. Nevertheless the bus is controlled by the connected remote-master. The LWCS acts as the bus master of the local bus and the connected slaves modules. There-fore the LWCS has the ability to control ...

Nach oben