Startseite|Slavebricks
Category

Slavebricks

P-2Rel4Di2Ai-##

2x Relay-Output, CO, potential free 4x Digital-Inputs, n-switch, 2-wire 2x Analog-Inputs, 10V/20mA, 2/3wire The Module includes two potential free relays, four digital inputs and 2 analog inputs with power supply. The digital inputs are designed for an external switch / open collector to ground. The analog inputs are either voltage or current inputs, depending on the variant. P-2Rel4Di2Ai-01 ID 5-131 module size 72mm x 66mm digital Input 4x com. ground ext. contact digital Output 2x Relay isolated CO analogue Input 2x 0..10V Notes Relay: 5A, 0..10V P-2Rel4Di2Ai-02 ID 5-132 module size 72mm x 66mm digital Input 4x com. ground ext. contact digital Output 2x Relay isolated CO analogue Input 2x 0/4..20mA Notes Relay: 5A, 0.. 20mA

G-2RelNo4RelCo-01

2x Relay-Output, NO, potential free 4x Relay-Output, CO, potential free This Relay module includes six isolated Relays. Each can switch a current of max. 4A. The first two are closing contacts. The other four are changeover contacts. The state of each relay is visualized by an LED. G-2RelNo4RelCo-01 ID 2-301 module size 72mm x 66mm digital Output 2x NO (Relay isolated) 4x CO (Relay isolated) Notes Relay contacts: 5A 

G-8Di8Do-01

8x Digital-Input, 24V, p-switch, 1-wire 8x Digital-Output, 24V, p-switch, 1-wire This module contains eight 24V digital inputs and eight 24V digital outputs. Each output supports a current of 0.25A but not more than 0.5A over all outputs in sum. All outputs have an over current protection and a over temperature protection. The logical state of each in-/output is visualised by an LED. Common ground for in- and outputs are the 0V terminals. The outputs are supplied via the 24V terminals over a 0.5A polyfuse. All terminals use push-in connection technology for solid and fine-stranded conductors with up to 0.5mm². G-8Di8Do-01 ID 2-181 module size 72mm x 44mm digital Input 8x 24Vdc (com. ground) digital Output 8x 24Vdc (com. ground) Notes IOs: 24V 

P-2CcvCav4Do2Imp-01

2x Clack Control Valves with 2x Clack-Puls-Flow-Meter with 2x Resolver Inputs with 2x IR LED Outputs 1x Clack Alternator Valve 4x Digital Output (for driving LEDs) This module includes 3 motor controller with … Note: This module also requires the adaptor board inside the Clack-Filter- Valves. P-2CcvCav4Do2Imp-01 ID 5-601 module size 72mm x 66mm digital Input 4x 24Vdc (com. ground) analog Input 1x Conductivity other IOs  2x Clack Control (Valve head) 1x ClackAltern (Valve head) Notes supports: 2 softener control valve, 1 alternator valve 

P-LfTmpAoDAioImp-##

1x LF-Input, conductive, 2-wire 1x Temperature, KTY2K, 2-wire 1x Analog Output, 0-20mA, 2/3-wire 1x Analog Input, 10V/20mA,2/3-wire 1x Impuls-In-/Output, n/p-switch, 2/3-wire can be used also as a Digital-Input This module contains all IOs for a typical conductivity mesurement with a range of 1 ... 4000μS/cm (configurable). It supports the common cell constants of k = 0.01... 1.0 (configurable). An inte-grated temperature input (for KTY81, PT1000 on request) supplies the necessary temperature compensation. A special impulse input allows the direct adaption of a hall or reed-contact flow and volume sensor from 0.01 up to 250Hz. Addi-tionaly one universal analog input and one output can be used for other analog sensors/actors, both with a range of 0/4 … 20mA. Futhermore a semiconductor impulse output is present to control e.g. dosing ...

P-6Rel5DiPow-01

2x Relay-Output, NO, supply switching 2x Relay-Output, CO, supply switching 2x Relay-Output, CO, potential free 5x Digital-Inputs, 2-wire, common gnd 1x AC-Current Input,2/20 Ap The module includes 6 digital relay outputs, 5 n-switching inputs and 1 inductive AC-current senor. The module has two potential free change-over relays which can switch a continouse current of 4A. Four other relays are able to supply up to 230V. 2 of these are closing and the other 2 are switch-over. Each of the supplying relay can switch up to 5A. The max. permant sum current over the supply outputs is 5A. P-6Rel5DiPow-01 ID 5-302 module size 72mm x 110mm digital Input 5x ext. contact (com. ground) digital Output 2x  1Ph-NO (Relay 230V) 2x 1Ph-CO (Relay 230V) 2x CO (Relay isolated) Notes Meas: ...

P-2Rel6Di-01

2x Relay-Output, CO, potential free 6x digital-Inputs, n-switch, 2-wire The Module includes two potential free relays each for max. 5A and six digital inputs. These inputs need an external closing to ground. P-2Rel6Di-01 ID 5-122 module size 72mm x 66mm digital Input 6x com. ground ext. contact digital Output 2x Relay isolated CO Notes Relay: 5A

P-112RelX-01

1x Relay-Output, NO, supply switching 1x Relay-Output, CO, supply switching 2x Relay-Output, NO, supply switching CAE_P-112RelPow-01: contains an additional AC-current measurement This module includes four relays with RC-Part and one independent current messurement. Relay 1 consists of a closing contact and can handle a permanent/pulse cur-rent of 5/16A. Relay 2 is a switchover contact and handles a perma-nent/pulse current of 5/8A. Relay 3 and 4 are closing contacts and handle a perma-nent/pulse current of 4/6A. The current messurement is developed up to 10A eff. P-112Rel-01 ID 5-101 module size 72mm x 66mm digital Output 3x 1Ph-NO (Relay 230V) 1x 1Ph-CO (Relay 230V) Notes Relay: 16/8/5A P-112RelPow-01 ID 5-102 module size 72mm x 66mm digital Output 3x 1Ph-NO (Relay 230V) 1x 1Ph-CO (Relay 230V) analog Input 1x ...

B-4DimLedI-##

4x LED-Dimmer, const. current, 12-40V This module contains four independent PWM-LED outputs with a common supply of 12...40V and a PWM-frequency of appox. 670 Hz. The PWM resolution is 24.000 steps. Each of these channels can control a permanent resistive load of max. 1A and contains a quick acting 1A melting fuse for output protection. B-4DimLedI-01 ID 4-565 module size 72mm x 55mm analogue Output LED-Dimmer-I  Notes 0...350mA, max. 40V  B-4DimLedI-02 ID 4-566 module size 72mm x 55mm analogue Output LED-Dimmer-I  Notes 0...700mA, max. 40V

B-4DimLedU-##

4x LED-Dimmer, PWM, 12-40V This module contains four independent PWM-LED outputs with a common supply of 12...40V and a PWM-frequency of appox. 670 Hz. The PWM resolution is 24.000 steps. Each of these channels can control a permanent resistive load of max. 2A and contains a quick acting 2,5A melting fuse for output protection. B-4DimLedU-01 ID 4-561 module size 72mm x 55mm analogue Output LED-Dimmer-UG Notes 0..100% PWM, max 40V/2A 

Nach oben