Koppel-Brick, von Remote-Bus auf Local-Bus auf
.. TCP/IP (via LAN)
.. CAN (via CAN2.0)
.. Serial (via RS485, RS232)
with PTR Terminals
CAE_Z-UniBridgeMX-13-RB-p
69,00 € excl. VAT
excl. 19% VAT plus Shipping Costs
| Quantity | Discount | Price |
|---|---|---|
| 1 - 4 | — | 69,00 € |
| 5 - 9 | 11 % | 61,41 € |
| 10 - 49 | 17 % | 57,27 € |
| 50 - 99 | 23 % | 53,13 € |
| 100 - 249 | 32 % | 46,92 € |
| 250 - 499 | 35 % | 44,85 € |
| 500+ | 39 % | 42,09 € |
Description
ID: 1-613
Order No.: CAE_Z-UniBridgeMX-13-RB-p
Terminal: push-in (for < 1.5mm²)
Size: (72mm x 90mm)
BBFCP: 2-1-1
Weight: 70g
The UniBrigdeMX is a coupling mode between an emBRICK Remote Bus and a Local Bus. Here it acts as a “non intelligent” remote bus slave and a local bus master and connects e.g. a PC with a string of the brickBUS® slaves modules.
The largest variant (1-613) contains the interfaces LAN, CAN and Serial (RS232 and RS485) which can be used to couple a remote-master. It is also possible to use the CAN and RSxxx as an IO-device (on request).
The unit is driven by 24Vdc (nominal) and also serves as power-supply unit that delivers 3.3V and 24V for the slave modules. Nevertheless the bus is controlled by the connected remote-master. The UniBrigdeMX acts as the bus master of the local bus and the connected slaves modules. Therefore it has the ability to control its string in exceptional situations autarkic e.g. with a teached output pattern.
Away from the coupling mode, the board can furthermore act as a low cost/low power I4.0/IoT-Interface adapter that supports the connection between local control units (RSxxx, TTL, CAN) and the WAN/Internet and also as a standalone bus master.
With PTR Terminals.
Technical specifications
Features:
| Category | Feature | Quant. | Details |
|---|---|---|---|
| Control unit | Processor | 1 | 32Bit, 80 MHz 512kB-Flash, 128KB-RAM, 8kB-EEPROM |
| Com. service | PC-Visualisierung | 1 | via LAN |
| Interface | CAN | 1 | not isolated, ESD protected |
| Interface | LAN | 1 | Ethernet IEEE 802.3 |
| Interface | RS232 | 1 | not isolated, ESD protected |
| Interface | RS458 | 1 | not isolated, ESD protected |
Processors/controllers:
| Usage | Processor | Memory | Details |
|---|---|---|---|
| Control unit | 32Bit, 80MHz | 32Bit, 80 MHz 512kB-Flash, 128KB-RAM, 8kB-EEPROM |
Data interfaces:
| Interface | Bit rate | electrical connection | Remark |
|---|---|---|---|
| Brick.RS485-RS232 | max. 115kbps | 3-wire | not isolated, ESD protected |
| Brick.RS485-RS485 | max. 250kbps | two wire | not isolated, ESD protected |
| Brick.CAN-CAN | max. 1Mbps, CAN2.0B | two wire | not isolated, ESD protected |
| Brick.X02-brickBUS | max. 1Mbps | brickBUS, TTL 3.3V (intern) | IO-module interface |
| Brick.X03-Ethernet | 10/100Mbps, IEEE 802.3 | RJ45, TIA-568A | 10BASE-T/100BASE-T |
3D-View
More information upon request
support@embrick.de
You must be logged in to post a review.
Reviews
There are no reviews yet.